文章详情
您所在位置:首页 > 就业招聘 > 西门子(深圳)磁共振有限公司2018校园招聘信息

西门子(深圳)磁共振有限公司2018校园招聘信息

2017-09-12来源: 浏览次数:

·     公司简介

 

总体介绍:

西门子(深圳)磁共振有限公司(SSMR)于2002年植根中国,是西门子医疗的独资子公司。公司位于深圳高新技术园区,占地面积超过四万平方米。业务范围涵盖MR(磁共振成像系统)、AT(临床治疗系统)以及CV(医疗器械零部件),是一家集研发、生产、物流、市场、客户服务于一体的高新技术企业

 

发展经历:

在西门子医疗的全球战略支持下,SSMR迅速成长为除西门子MR事业部德国总部以外的最大研发及生产中心和西门子磁共振事业部同时拥有磁共振系统整机研发和生产能力的全球基地。

为满足全球客户对医疗产品日益增长的需求,西门子医疗在继续扩充深圳的MR研发和生产规模的同时,于2012年伊始在西门子磁共振园相继建立AT和CV事业部的研发生产基地,树立了西门子医疗产业立足深圳、辐射全球的一块重要里程碑。

 

三大事业部简介:

 

MR(磁共振)事业部 

作为西门子MR全球运营体系的重要组成部分,深圳的MR事业部与德国爱尔兰根总部、英国牛津磁体技术有限公司密切合作,共同研发引领全球磁共振发展潮流的杰出产品。研发团队精英荟萃,拥有从部件到整机的全方位研发实力,研发总人数占公司总人数的四分之一,其中四分之三具备硕士以上学历。SSMR研发和生产的所有磁共振成像系统均面向全球供货,迄今已为全球100多个国家的终端用户提供了数千台具有领先技术和卓越质量的磁共振成像系统。自2012年起,西门子向全球客户交付的MR产品中每三台就有一台出自SSMR,其中70%以上出口,出口前五位国家分别为日本、印度、巴西、美国和韩国。SSMR作为西门子磁共振全球三大总部支持中心之一,为全球售后团队提供疑难问题的技术支持和咨询服务。

 

AT(临床治疗系统)事业部 

AT事业部是除德国总部以外全球唯一的研发创新基地,负责西门子X射线血管造影系统的设计开发、制造及技术支持,同时集市场和物流于一体,目前面向全球近200个国家的客户提供优质产品,主要出口至欧洲、美国、日本及印度。深圳的AT事业部与位于德国弗希海姆(Forchheim) 的AT总部密切合作,不但肩负着生产西门子Artis系列血管造影新产品的任务,同时也是西门子医疗业务全球市场特别是快速发展的新兴市场的重要基地。

 

CV(医疗器械零部件)事业部 

做为磁共振和X射线血管造影系统事业部重要零部件的内部供应商,CV事业部为医疗领域的客户提供具有竞争优势和高性价比的优质产品和解决方案:包括定制的电子系统,高性能成像解决方案以及远程连接解决方案。我们贴近客户、顺应市场、迅速响应,满足全球客户的需求。

·     招聘职位

MR Process Engineer/工艺工程师

What are my responsibilities?

-     Steer definition, development and implementation of production processes.

-     Transfer design from R&D to production (New project and Change Request)

-     Implement new production technologies regarding PE, documentation and validation etc.

-     Develop and maintain production documentation (DMR, Master plan, FMEA etc.) Control the rework of failed components.

-     Develop and manage production tooling, equipment.

-     Entail PE expert knowledge input to other departments and customer.

-     Map for production layout (working area).

-     Support to QM to ensure that governmental and internal regulatory are followed.

-     Participate supplier audits.

What do I need to qualify for this job?

-     Bachelor or Master Degree for science or technology education, major in Cryogenic.

-     Superconducting magnet Precool & Test process development. Process monitor according to our quality system and product introduction plans for medical devices.

-     Helium management for usage balance, system development.

-     Have a strong capability for process development, optimization and troubleshooting; Familiar with quality management knowledge and project development.

-     Fluent oral and written English.

-     Basic commercial knowledge is must; Have a good capability to coach team member.

-     Positive attitude, self-motivated. Able to work under high pressure

-     Know how for MR basic knowledge; General ability to cooperate with worldwide partners

 

MR Equipment Engineer/设备工程师

What are my responsibilities?

-     Implement overall maintenance to maintain equipment production productivity with plan.

-     Implement calibration management for quality management requirement.

-     Implement equipment installation and optimization to meet the needs of production.

-     Troubleshoot the production and measurement equipment.

-     Manage spare parts of the equipment for maintenance and troubleshooting.

-     Review the equipment performance for intended quality requirement.

-     Make the maintenance document with process requirement.

-     Develop and improve the equipment to promote the equipment productivity.

-     Support to QMS to internal and external audit.

-     Provide training to improve technology ability.

What do I need to qualify for this job?

-     Bachelor or Master Degree for science or technology education, major in mechanical or electrical engineering.

-     Have a strong capability for equipment development, optimization and troubleshooting; Familiar with quality management procedure.

-     Fluent oral and written English.

-     Good communication and interpersonal skill.

-     Positive attitude, hard-working. Able to work under high pressure.

 

 

MR RF Process Engineer/射频工艺工程师

What are my responsibilities?

-     Technological support for the RF production, process monitor according to our quality system and product introduction plans.

-     Steering, controlling and coaching the definition, development and implementation of RF production process.

-     Transferring design from PLM to production (New project and change request).

-     Be responsible for troubleshooting during production and improving quality of product.

-     Be responsible for production process optimization and productivity improvement.

-     Developing and maintaining production documentation (DMR、Master planFMEA etc.)

-     Analysis the return reason of return parts and take action to reduce the return rate of RF products.

-     Developing tooling、equipment and new technology including documentation and validation.

What do I need to qualify for this job?

-     Master degree, majored in RF, Electrical Engineering or mechatronic.

-     Has practice in Electronic factory will be better. Have some software (Office,Microsoft Access etc.)Knowledge is preferred.

-     Fast learner and good communication skill.

-     Good English in both speaking and writing.

-     Be responsible to some components by distributing CS requirements and experience to PLM for excellent production serviceability; by writing technical documentation for easy service activities.

-     Insure the spare parts support with CSML by professional technical knowledge and experience to maintain SSMR products life cycle.

-     Monitor the global notification review for SSMR productions to ensure PSI correctly recognized and documented.

-     Define the spare part and IVK during project development and ensure the spare part availability at D4.

-     Contribute to the CR and charm handling to ensure the continuous serviceability and spare part support.

 

 

MR Serviceability & Documentation Engineer/可维护性和文档工程师

What are my responsibilities?

-     Setup the service requirements for the new products, setup and manage the CS project plan to make sure CS tasks finished on time aligning with PLM project plan.

-     Be responsible to some components by distributing CS requirements and experience to PLM for excellent production serviceability; by writing technical documentation for easy service activities.

-     Make sure the appointed service requirements are implemented in the products development through the design documents reviewing.

-     Contribute to the component test, integrated test and system test to ensure the serviceability.

-     Plans and schedules serviceability projects, and determines respective budgets.

-     Contribute to the CR and charm handling to ensure the continuous serviceability and spare part support.

-     Collect components' update information to make sure continuous serviceability and Tdoc update.

-     Contribute the updates (UI) and new knowledge (Speed info) to the local CSEs to maintain product at customer site.

What do I need to qualify for this job?

-     Bachelor or above.

-     perfect English

MR Physics Engineer/物理工程师

What are my responsibilities?

-     Detect and analysis new MR technology and its feasibility.

-     Maintain hardware related sequences, such as service sequences and adjustment sequences for each project.

-     Develop new sequences to measure new MR system defection, and provide correction method.

-     Perform system hardware test, standard test.

-     Develop MR safety related model for each project, such as SAR, gradient stimulation and acoustic noise model.

-     Take system architecture role in project, develop new hardware architecture concept and submit patent.

-     Evaluation of new prototypes (HW or SW) from MR physics point of view.
Maintain system hardware related parameters; modify parameters via contacting component owner.

-     Support of component (Hardware and Software) development, interfaces and characteristics evaluation etc.

What do I need to qualify for this job?

-     University degree in physics, biomedical engineering, or similar (MSc or higher). Fundamental know-how of MR physics necessary.

-     International orientation essential.

-     Experience with international employers, colleagues and customers are preferred.

-     Ability to operate in foreign cultures mandatory.

  

      MR Hardware Development EngineerFPGA/ 硬件工程师(FPGA

What are my responsibilities?

-     FPGA development, digital circuit design.

-     Support of interface design.

-     Maintenance of components

 

What do I need to qualify for this job?

-     Internship experience in FPGA design, especially in communication area, familiar with schematic design. Especially:
1)FPGA, with project experience on FPGA development or IC experience on Integrated Circuit design or verification,
2
Majoring Electrical and/or Electronics Engineering, Electrical automation, Signal Processing, Information Engineering, Measuring and Control Technology,
and be familiar with PCB/SCH, PCB and schematic design and other EDA tools

-     Fluent English in both writing and speaking

-     Internship experience of electronic design experience in FPGA design. Special working experience in communication would be preferred; Experience in circuitry design.

 

MR RF R&D Engineer/射频研发工程师

What are my responsibilities?

-         Create & Maintain Sub-system and Component Requirement spec, including Research current technology, negotiate with supplier, create and improve requirement spec.

-         Plan, design and perform electrical & mechanical specified hardware components unit test and system integration test and make qualified records

-         Monitor the returning of responsibly HW components and take actions for improvement from technical side

-         Evaluate Supplier via communication and controlling from technical point of view.

-         Drive responsible HW component improvement (CR/Charm) and technical supporting.

-         Cooperate with team members for Hardware concept and Engineering prototype developing.

-         Support hardware development related process improvement.

What do I need to qualify for this job?

-     1~3 years experience in corresponding hardware development; or equal project experience under post graduate phase.

-     International orientation is essential; capabilities to operate in foreign cultures.

-     Moderate English speaking and writing skills.

MR SW Design Engineer/软件设计工程师

What are my responsibilities?

-        Understand requirement from product manager and derive into functional requirement specification

-        Design software subsystem or components. Describe the detailed design in design specification

-        Implement source code and perform unit test in good quality

-        Review source code from peer developer

-        Fix software bug reported in defect management system

-        Perform software integration in system and transfer feature to software tester.

-        Investigate customer complaint and write report in a timely basis

-        Review and inspect technique document

What do I need to qualify for this job?

-     Having project experience in C++, C#, .NET, JavaScript

-     Experience in UML

-     Knowledge in design pattern

-     Object oriented software engineering experience in C++/C# for large software system

        

         MR SW Test Engineer/软件测试工程师.

What are my responsibilities?

-     Develop test strategy and test cases according to requirement.

-     Perform SW Integration Test or system test according to assigned test cases

-     Document software bugs in defect management system with sufficient supportive information

-     Verify transferred features from software design engineer

-     Understand product defect and reproduce the symptom in system

-     Review and inspect software functional requirement specification

-     Make test plan according to available resource, assigned requirement and defined timeline

-         Track state-of-the-art test technology and drive technology update (Senior and above)

-         Maintain and develop experience pool for responsible area, train and transfer knowledge to new comer (Senior and above)

What do I need to qualify for this job?

-         At least 1 years’ experience in testing or test engineering related work    

-         Capabilities to operate in foreign cultures.

-         High English speaking and writing skills

-         Good communication and coordination skills.

         AT Software Engineer

       What are my responsibilities?

-     Drive and coach the development of software under constrains of the related legal, regulatory, and normative requirements.

-     Plan and estimate resource of module and unit development incl. test activities and documentation.

-     Concept design and specify low level software architecture, aligned with the system software architecture.

-     Create and update the functional specification of the software components.

-     Create software component test specification, verifies the software.

-     Integrates modules on unit level and performs unit tests.

       What do I need to qualify for this job?

-     A Master’s degree in computer engineering or science or related discipline and relevant experience in software design;

-     Strong understanding of software development basics like C, C++, C#, xml, OOD/OOP experience;

-     Experience with software development CASE (Computer Aided/Assisted Software Engineering) tools like IBM Rational rose etc.;

-     Knowledge of control software development for embedded system and understanding embedded system architectures and communication protocols;

-     Experience and knowledge of TCP/IP, CAN and Profinet;

-     Experience of Software development of motion control is a plus;

-     Fluency in English and good in communication skill;

-     International travel is required.

       AT Hardware developer & engineer/硬件开发工程师

      What are my responsibilities?

-     Develop hardware under constrains of the related legal, regulatory, and normative requirements

-     plan and estimate resource of module and unit development incl. test activities and documentation

-     Concept design and specify low level hardware architecture, aligned with the system hardware architecture

-     Create and update the functional specification of the hardware components

-     Create hardware component test specification, verfies the hardware

-     Integrates modules on unit level and performs unit tests

-     Prepare of supply chain of hardware components

-     Perform/create design transfer, packaging, labeling, system-flow-chart

-     Support QIB by solving field issues

-     Work on changes incl. Documentation and tests

What do I need to qualify for this job?

-     A Master’s degree in electronics or related discipline and relevant experience in hardware design.

-     Strong understanding of HW basics like transistor level design, opamps, comparators, inverter design.

-     Module implementation experience

-     Strong circuit building, prototyping and troubleshooting skills

-     Familiarity with the use of test and measurement equipment.

-     Knowledge of electronic circuit design using discrete electronic components.

-     Knowledge of embedded system architectures and communication protocols and interface methodologies is a plus.

-     Knowledge of digital design – design of glue logic for interfacing peripheral components with the main processing unit.

-     Fluency in English and good in communication skill

-     International travel is required.

欢迎有兴趣同学投递简历。
电邮:
ssmr-Campus_Recruitment.team@siemens-healthineers.com
简历命名格式:职位名称-学校-专业-姓名

工作地点:中国深圳高新区中区高新中二道32号西门子磁共振园

了解更多请点击https://www.healthcare.siemens.com.cn/about-us-cn/healthcare-development-ssmr-cn

  • 上一篇文章:中国科学院计算技术研究所2018年度招聘启事
  • 下一篇文章:中国电子科技集团公司第十三研究所招聘
  • 返回顶部